300-410模擬解説集、300-410日本語独学書籍

2025年Xhs1991の最新300-410 PDFダンプおよび300-410試験エンジンの無料共有：https://drive.google.com/open?id=1iOtie986xLZgdIlsZiQq9LC7Ec2vqXtu

Ciscoの300-410認定試験を受験する気があるのですか。この試験を受けた身の回りの人がきっと多くいるでしょう。これは非常に大切な試験で、試験に合格して300-410認証資格を取ると、あなたは多くのメリットを得られますから。では、他の人を頼んで試験に合格する対策を教えてもらったのですか。試験に準備する方法が色々ありますが、最も高効率なのは、きっと良いツールを利用することですね。ところで、あなたにとってどんなツールが良いと言えるのですか。もちろんXhs1991の300-410問題集です。

Cisco 300-410試験は、高度なエンタープライズルーティングおよびサービスソリューションを実装する能力を証明したいITプロフェッショナルを対象とした認定試験です。この試験は、Cisco Certified Network Professional（CCNP）Enterprise認定トラックの一部であり、ネットワークエンジニアリング、設計、実装のキャリアを進めたいプロフェッショナルにとって必須の要件です。

Cisco Certified Specialist -Enterprise Advanced Infrastructure実装認証を獲得することは、高度なルーティングテクノロジーとサービスの専門知識を実証するため、ITプロフェッショナルの履歴書に貴重な追加になる可能性があります。スキルと知識を検証することに加えて、この認定は、専門家が自分のキャリアを進め、エンタープライズネットワーキングとインフラストラクチャの実装における新しい機会を追求するのにも役立ちます。

シスコ300-410試験は、エンタープライズネットワークにおける高度なルーティング技術とサービスの実装とトラブルシューティングに必要な知識とスキルを検証する認定試験です。この試験は、シスコ認定スペシャリスト-エンタープライズ上級インフラストラクチャの実装の一部であり、エンタープライズネットワーキングの経験を持つネットワークプロフェッショナルを対象としています。

>> 300-410模擬解説集 <<

300-410日本語独学書籍、300-410日本語講座

関連する300-410認定資格を取得するためにXhs1991試験の準備をしている場合、ここCiscoで良い知らせがあります。当社がまとめた300-410ガイド急流は、300-410試験に合格し、関連する認定資格を取得したい受験者の秘密の武器として賞賛されています。あなたの秘密兵器を手に入れることができます。最高の300-410トレーニングImplementing Cisco Enterprise Advanced Routing and Services資料を作成したことに対する当社の評判は、将来のビジネスの健全な基盤を作成しました。

Cisco Implementing Cisco Enterprise Advanced Routing and Services 認定 300-410 試験問題 (Q475-Q480):

質問 # 475

Refer to the exhibit. When an FTP client attempts to use passive FTP to connect to the FTP server, the file transfers fail Which action resolves the issue?

A. Configure to permit TCP ports higher than 1023.
B. Modify traffic filter FTP-SERVER in to the outbound direction.
C. Modify FTP-SERVER access list to remove established at the end.
D. Configure active FTP traffic.

正解：A

質問 # 476
Refer to the exhibit.

Refer to the exhibit After a misconfiguration by a junior engineer, the console access to router A is not working Which configuration allows access to router A?

正解：A

質問 # 477
Refer to the exhibit. Which action adds the 10.1.7.6/32 route to the BGP table?

A. Add summary-address 10.1.7.6 255.255.255.0.
B. Add the network 10.1.7.6 mask 255.255.255.255 backdoor command.
C. Add the network 10.1.7.6 mask 255.255.255.255 command.
D. Add a static route for the 10.1.7.6/32 network.

正解：C

質問 # 478

Refer to the exhibit. A network engineer troubleshooting a packet drop problem for the host 172.16.100.5 notices that only one link is used and installed on the routing table, which saturates the bandwidth. Which action must the engineer take to resolve the high bandwidth utilization problem and share the traffic toward this host between the two available links?

A. Set the eigrp variance equal to 4 to install a second route with a metric not larger than 4 times of the best metric.
B. Disable the eigrp split horizon loop protection mechanism.
C. Change the EIGRP delay metric to meet the feasibility condition.
D. Set the eigrp variance equal to 3 to install a second route with a metric not larger than 3 times of the best metric.

正解：C

質問 # 479
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.

正解：

解説：

Explanation
DownThis is the first OSPF neighbor state. It means that no information (hellos) has been received from this neighbor, but hello packets can still be sent to the neighbor in this state.
During the fully adjacent neighbor state, if a router doesn't receive hello packet from a neighbor within the Router Dead Interval time (RouterDeadInterval = 4*HelloInterval by default) or if the manually configured neighbor is being removed from the configuration, then the neighbor state changes from Full to Down.
AttemptThis state is only valid for manually configured neighbors in an NBMA environment. In Attempt state, the router sends unicast hello packets every poll interval to the neighbor, from which hellos have not been received within the dead interval.
InitThis state specifies that the router has received a hello packet from its neighbor, but the receiving router's ID was not included in the hello packet. When a router receives a hello packet from a neighbor, it should list the sender's router ID in its hello packet as an acknowledgment that it received a valid hello packet.
2-WayThis state designates that bi-directional communication has been established between two routers.
Bi-directional means that each router has seen the other's hello packet. This state is attained when the router receiving the hello packet sees its own Router ID within the received hello packet's neighbor field. At this state, a router decides whether to become adjacent with this neighbor. On broadcast media and non-broadcast multiaccess networks, a router becomes full only with the designated router (DR) and the backup designated router (BDR); it stays in the 2-way state with all other neighbors. On Point-to-point and Point-to-multipoint networks, a router becomes full with all connected routers.
At the end of this stage, the DR and BDR for broadcast and non-broadcast multiacess networks are elected.
For more information on the DR election process, refer to DR Election.
Note: Receiving a Database Descriptor (DBD) packet from a neighbor in the init state will also a cause a transition to 2-way state.
ExstartOnce the DR and BDR are elected, the actual process of exchanging link state information can start between the routers and their DR and BDR. (ie. Shared or NBMA networks).
In this state, the routers and their DR and BDR establish a master-slave relationship and choose the initial sequence number for adjacency formation. The router with the higher router ID becomes the master and starts the exchange, and as such, is the only router that can increment the sequence number. Note that one would logically conclude that the DR/BDR with the highest router ID will become the master during this process of master-slave relation. Remember that the DR/BDR election might be purely by virtue of a higher priority configured on the router instead of highest router ID. Thus, it is possible that a DR plays the role of slave. And also note that master/slave election is on a per-neighbor basis.
ExchangeIn the exchange state, OSPF routers exchange database descriptor (DBD) packets. Database descriptors contain link-state advertisement (LSA) headers only and describe the contents of the entire link-state database. Each DBD packet has a sequence number which can be incremented only by master which is explicitly acknowledged by slave. Routers also send link-state request packets and link-state update packets (which contain the entire LSA) in this state. The contents of the DBD received are compared to the information contained in the routers link-state database to check if new or more current link-state information is available with the neighbor.
LoadingIn this state, the actual exchange of link state information occurs. Based on the information provided by the DBDs, routers send link-state request packets. The neighbor then provides the requested link-state information in link-state update packets. During the adjacency, if a router receives an outdated or missing LSA, it requests that LSA by sending a link-state request packet. All link-state update packets are acknowledged.
FullIn this state, routers are fully adjacent with each other. All the router and network LSAs are exchanged and the routers' databases are fully synchronized.
Full is the normal state for an OSPF router. If a router is stuck in another state, it is an indication that there are problems in forming adjacencies. The only exception to this is the 2-way state, which is normal in a broadcast network. Routers achieve the FULL state with their DR and BDR in NBMA/broadcast media and FULL state with every neighbor in the remaining media such as point-to-point and point-to-multipoint.
Note: The DR and BDR that achieve FULL state with every router on the segment will display FULL/DROTHER when you enter the show ip ospf neighbor command on either a DR or BDR. This simply means that the neighbor is not a DR or BDR, but since the router on which the command was entered is either a DR or BDR, this shows the neighbor as FULL/DROTHER.

質問 # 480
......

形式に関する300-410試験問題の3つの異なるバージョンがあります：PDF、ソフトウェア、オンラインAPP。内容は同じですが、さまざまな形式が実際にお客様に多くの利便性をもたらします。 PDFバージョンの300-410試験の練習問題を印刷して、どこにいても受験できるようにすることができます。また、ソフトウェアバージョンは実際の試験環境をシミュレートし、オフラインでの練習をサポートできます。また、APPオンラインはあらゆる種類の電子機器に適用できます。誰であっても、300-410準備の質問を通じて、あなたの目標を達成するために最善を尽くすことができると信じています！

300-410日本語独学書籍: https://www.xhs1991.com/300-410.html

BONUS！！！ Xhs1991 300-410ダンプの一部を無料でダウンロード：https://drive.google.com/open?id=1iOtie986xLZgdIlsZiQq9LC7Ec2vqXtu

Doug Ward Doug Ward

Biography

300-410模擬解説集、300-410日本語独学書籍

300-410日本語独学書籍、300-410日本語講座

Cisco Implementing Cisco Enterprise Advanced Routing and Services 認定 300-410 試験問題 (Q475-Q480):

Quick Links